D-link DES-F1010P-E 10 Port Unmanaged PoE Switch

Buy D-link DES-F1010P-E 10 Port Unmanaged PoE Switch Price in Bangladesh

The D-Link DES-F1010P-E is a 10-port unmanaged PoE+ switch engineered for small-to-medium surveillance systems, wireless access point deployments, and other PoE-equipped device networks. It delivers both power and data across Ethernet cables, greatly simplifying installations where devices are placed away from power outlets. Eight of the ten ports are PoE+ capable (supporting IEEE 802.3af/at), while the remaining two serve as uplink ports for non-PoE connections or further network expansion.

Designed with “long-reach PoE” capability, this switch can power devices up to 250 meters away on the PoE ports (when using quality Cat5e/Cat6 cable), enabling flexible placement for IP cameras or outdoor wireless points. Despite its capacity, the DES-F1010P-E maintains a quiet, fanless operation in a rugged, efficient design. To add protection against electrical surges, built-in lightning protection (6 kV) is included, guarding connected devices in challenging environments.

With plug-and-play simplicity, no configuration is required—just connect your devices, provide upstream connectivity via the uplinks, and the switch handles negotiation, power delivery, and traffic forwarding. Its low profile and desktop-friendly form factor make it suitable for wall or shelf mounting in control rooms, offices, or outdoor enclosures. Overall, this switch aims to deliver reliable PoE networking with minimal fuss and maximum reach.

✅ Key Features

• 8 PoE+ Fast Ethernet Ports + 2 Uplink Ports: Ports 1-8 supply power + data; ports 9-10 are uplinks for standard data connections. 

• IEEE 802.3af/at Support: Compatible with both PoE standards, allowing devices needing up to ~30 W per port. 

• Long-Reach Mode (Up to 250 m): Enables PoE + data transmission over extended cable distance, useful for remote cameras or access points. 

• High PoE Budget (~96 W): Enough total power to run several PoE devices simultaneously without overloading. 

• Surge Protection (6 kV): Lightning / electrical surge protection to enhance reliability in adverse conditions. 

• Fanless & Silent Operation: No moving parts for cooling means quieter operation and lower maintenance. 

• Smart-like Features via DIP Switch / Modes: Supports modes like Extend, VLAN isolation among PoE ports, QoS, PoE Reset etc., giving more flexibility despite being “unmanaged.” 

✅ Why Buy This Product

• When you need to power multiple PoE devices—IP cameras, VoIP phones, wireless APs—far from standard power outlets, this switch saves you cost and complexity by combining power and data over single Ethernet cables.

• The long-reach capability (up to ~250 m) lets you deploy devices in locations previously hard to cable or power, such as distant corners of property, poles, or outdoor structures.

• Surge protection ensures devices connected to the switch are guarded against spikes caused by lightning or unstable power, which is particularly helpful in outdoor or exposed locations.

• Since the switch is unmanaged and plug-and-play, setup is fast, simple, and doesn’t require networking expertise. Great for users who want reliable performance without configuration overhead.

• The silent, fanless design and compact build make it suitable for low-noise environments—offices, small network racks, surveillance control rooms—where audible noise or heat is a concern.